KEIM CONCRETAL®-LASUR: DESIGN AND CONSERVE THE FAIR-FACED CONCRETE SURFACESFair-faced concrete - one of the largest challenges in structural engineering and an important element in architecture. As the element that bears the load and gives an element its shape, the concrete is a part of the design and has a specific architectural effect on the structure. In each phase of the structural work being carried out, whether directly after the stripping of the concrete surfaces, or after decades of being exposed to the elements, the type and way the surface treatment is carried out determines the character.
In contrast to systems that have been heavily modified with plastics, mineral coatings from KEIM, from colourwashes to opaque, accentuate the character of the concrete. KEIM Concretal-Lasur retains concrete surfaces, whilst at the same time protecting it for a very long time. When it depends on the concrete – KEIM Concretal-Lasur (Glaze). |
|
OVERVIEW OF KEIM CONCRETAL®-LASUR SYSTEM PRODUCTS
KEIM Concretal®-LasurSol-silicate one-component paint for translucent or opaque thin layer coatings. Especially economical, preventive concrete protection. Dilutions are possible in any ratio with Concretal-Base or Concretal-Fixativ to perform a translucent finish or to equalise visual shortcomings.
Protection grade: Weathering Colour shade White, concrete grey in several shades (e.g. colour shade 9526), KEIM Palette exclusiv Application Brush, roller Consumption For two opaque coats: approx. 0.25 l/m² Concretal-Lasur and 0.04 l KEIM Concretal-Fixativ Packaging 1 l, 5 l and 15 l container Pallet: 24 x 15 l / 70 x 5 l |
| ||||||
KEIM Concretal®-Base (Pigment-free additive)Sol-silicate based pigment-free additive for Concretal-Lasur. The desired degree of transparency is achieved by adding the corresponding quantity of Concretal-Base to Concretal-Lasur.
KEIM Concretal-Base allows mineral matt, low-pigment finishes together with ideal application consistency, reduced settling and weather-resistant layer thicknesses. Colour shade Colourless Application Brush, roller Consumption For one low-pigment coat: approx. 0.08 – 0.15 l/m² prepared Lasur mix of Concretal-Lasur and Concretal-Base Packaging 5 l and 15 l container Pallet: 24 x 15 l / 70 x 5 l |
| ||||
KEIM Concretal®-Fixativ (Dilution)Dilution for Concretal-W, Concretal-W-Grob, Concretal-Lasur and KEIM Contact-Plus
Colour shade Colourless Consumption For two opaque coats: approx. 0.25 l/m² Concretal-Lasur + 0.04 l KEIM Concretal-Fixativ Packaging 5 l and 20 l containers Pallet: 24 x 20 l / 96 x 5 l |
| ||||